|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
PD -94908 IRG4BC20MDPBF Features INSULATED GATE BIPOLAR TRANSISTOR WITH ULTRAFAST SOFT RECOVERY DIODE C Short Circuit Rated Fast IGBT VCES = 600V * Rugged: 10sec short circuit capable at VGS=15V * Low VCE(on) for 4 to 10kHz applications * IGBT Co-packaged with ultra-soft-recovery antiparallel diode * Industry standard TO-220AB package * Lead-Free * Offers highest efficiency and short circuit capability for intermediate applications * Provides best efficiency for the mid range frequency (4 to 10kHz) * Optimized for Appliance Motor Drives, Industrial (Short Circuit Proof) Drives and Intermediate Frequency Range Drives * High noise immune "Positive Only" gate driveNegative bias gate drive not necessary * For Low EMI designs- requires little or no snubbing * Single Package switch for bridge circuit applications * Compatible with high voltage Gate Driver IC's * Allows simpler gate drive Parameter VCES IC @ TC = 25C IC @ TC = 100C ICM ILM IF @ TC = 100C tsc IFM VGE PD @ TC = 25C PD @ TC = 100C TJ TSTG Collector-to-Emitter Voltage Continuous Collector Current Continuous Collector Current Pulsed Collector Current Clamped Inductive Load Current Diode Continuous Forward Current Short Circuit Withstand Time Diode Maximum Forward Current Gate-to-Emitter Voltage Maximum Power Dissipation Maximum Power Dissipation Operating Junction and Storage Temperature Range Soldering Temperature, for 10 sec. Mounting Torque, 6-32 or M3 Screw. G E VCE(on) typ. = 1.85V @VGE = 15V, IC = 11A Benefits n-channel TO-220AB Absolute Maximum Ratings Max. 600 18 11 36 36 7.0 10 36 20 60 24 -55 to +150 300 (0.063 in. (1.6mm) from case) 10 lbf*in (1.1 N*m) Units V A s A V W C Thermal Resistance RJC RJC RCS RJA Wt Parameter Junction-to-Case - IGBT Junction-to-Case - Diode Case-to-Sink, flat, greased surface Junction-to-Ambient, typical socket mount Weight Min. ------------------------- Typ. ----------0.50 ----2 (0.07) Max. 2.1 2.5 -----80 ------ Units C/W g (oz) www.irf.com 1 3/6/01 IRG4BC20MDPBF Electrical Characteristics @ TJ = 25C (unless otherwise specified) Parameter Min. Collector-to-Emitter Breakdown Voltage 600 V(BR)CES/TJ Temperature Coeff. of Breakdown Voltage ---VCE(on) Collector-to-Emitter Saturation Voltage ---------VGE(th) Gate Threshold Voltage 4.0 VGE(th)/TJ Temperature Coeff. of Threshold Voltage ---gfe Forward Transconductance 3.0 ICES Zero Gate Voltage Collector Current ------VFM Diode Forward Voltage Drop ------IGES Gate-to-Emitter Leakage Current ---V(BR)CES Typ. ---0.67 1.85 2.46 2.07 ----11 3.6 ------1.4 1.3 ---Max. Units Conditions ---V VGE = 0V, IC = 250A ---- V/C VGE = 0V, I C = 1.0mA 2.1 IC = 11A VGE = 15V ---V IC = 18A See Fig. 2, 5 ---IC = 11A, TJ = 150C 6.5 VCE = VGE, IC = 250A ---- mV/C VCE = VGE, IC = 250A ---S VCE = 100V, IC = 11A 250 A VGE = 0V, VCE = 600V 2500 VGE = 0V, VCE = 600V, TJ = 150C 1.7 V IC = 8.0A See Fig. 13 1.6 IC = 8.0A, TJ = 150C 100 nA VGE = 20V Switching Characteristics @ TJ = 25C (unless otherwise specified) Qg Qge Qgc td(on) tr td(off) tf Eon Eoff Ets td(on) tr td(off) tf Ets LE Cies Coes Cres trr Irr Q rr di(rec)M/dt Parameter Total Gate Charge (turn-on) Gate - Emitter Charge (turn-on) Gate - Collector Charge (turn-on) Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Turn-On Switching Loss Turn-Off Switching Loss Total Switching Loss Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Total Switching Loss Internal Emitter Inductance Input Capacitance Output Capacitance Reverse Transfer Capacitance Diode Reverse Recovery Time Min. ---------------------------------------------------------------Diode Peak Reverse Recovery Current ------Diode Reverse Recovery Charge ------Diode Peak Rate of Fall of Recovery ---During tb ---Typ. 39 5.3 20 21 37 463 340 0.41 2.03 2.44 19 41 590 600 3.49 7.5 460 54 14 37 55 3.5 4.5 65 124 240 210 Max. Units Conditions 59 IC = 11A 8.0 nC VCC = 400V See Fig. 8 30 VGE = 15V ---TJ = 25C ---ns IC = 11A, VCC = 480V 690 VGE = 15V, RG = 50 510 Energy losses include "tail" and ---diode reverse recovery. ---mJ See Fig. 9, 10, 11, 18 3.7 ---TJ = 150C, See Fig. 9, 10, 11, 18 ---ns IC = 6.5A, VCC = 480V ---VGE = 15V, RG = 50 ---Energy losses include "tail" and ---mJ diode reverse recovery. ---nH Measured 5mm from package ---VGE = 0V ---pF VCC = 30V See Fig. 7 --- = 1.0MHz 55 ns TJ = 25C See Fig. 90 TJ = 125C 14 IF = 8.0A 5.0 A TJ = 25C See Fig. 8.0 TJ = 125C 15 VR = 200V 138 nC TJ = 25C See Fig. 360 TJ = 125C 16 di/dt 200A/s ---- A/s TJ = 25C See Fig. ---TJ = 125C 17 2 www.irf.com IRG4BC20MDPBF 12 10 Load Current ( A ) 8 Duty cycle : 50% Tj = 125C Tsink = 90C Gate drive as specified Turn-on losses include effects of reverse recovery Power Dissipation = 13W 60% of rated voltage 6 4 Ideal diodes 2 0 0.1 1 10 100 f , Frequency ( kHz ) Fig. 1 - Typical Load Current vs. Frequency (Load Current = IRMS of fundamental) 100 100 IC , Collector-to Emitter Current (A) I C , Collector-to-Emitter Current (A) 10 10 TJ = 150 C 1 T J = 150C TJ = 25 C 1 TJ = 25C VGE= 15V 20s PULSE WIDTH 0.1 0.1 1.0 VCE , Collector-to-Emitter Voltage (V) 10.0 0.1 V CC = 50V 5s PULSE WIDTH 6 8 10 12 14 16 VGE , Gate-to-Emitter Voltage (V) Fig. 2 - Typical Output Characteristics Fig. 3 - Typical Transfer Characteristics www.irf.com 3 IRG4BC20MDPBF 20 4.0 VGE = 15V 80s PULSE WIDTH VCE , Collector-to Emitter Voltage (V) Maximum DC Collector Current(A) IC = 22A 15 3.0 10 2.0 IC = 11A 5 IC = 5.5A 0 1.0 25 50 75 100 125 150 -60 -40 -20 0 20 40 60 80 100 120 140 TC , Case Temperature ( C) TJ , Junction Temperature (C) Fig. 4 - Maximum Collector Current vs. Case Temperature 10 Fig. 5 - Typical Collector-to-Emitter Voltage vs. Junction Temperature Thermal Response (Z thJC ) 1 D = 0.50 0.20 0.10 0.05 PDM t1 SINGLE PULSE (THERMAL RESPONSE) Notes: 1. Duty factor D =t 1 / t2 2. Peak T = PDM x Z thJC + TC J 0.0001 0.001 0.01 0.1 1 t2 0.1 0.02 0.01 0.01 0.00001 t1 , Rectangular Pulse Duration (sec) Fig. 6 - Maximum IGBT Effective Transient Thermal Impedance, Junction-to-Case 4 www.irf.com IRG4BC20MDPBF 800 VGE , Gate-to-Emitter Voltage (V) VGE = 0V, f = 1MHz Cies = Cge + Cgc , Cce SHORTED Cres = Cgc Coes = Cce + Cgc 20 VCC = 400V I C = 11A C, Capacitance (pF) 600 16 Cies 400 12 8 200 Coes Cres 4 0 1 10 100 0 VCE , Collector-to-Emitter Voltage (V) 0 10 20 30 40 QG , Total Gate Charge (nC) Fig. 7 - Typical Capacitance vs. Collector-to-Emitter Voltage Fig. 8 - Typical Gate Charge vs. Gate-to-Emitter Voltage 2.5 VCC = 480V VGE = 15V TJ = 25C I C = 11A 100 RG = 50 VGE = 15V VCC = 480V 10 IC = 22A IC = 11A IC = 5.5A 1 Total Switching Losses (mJ) 2.4 Total Switching Losses (mJ) 2.3 0 10 20 30 40 50 0.1 -60 -40 -20 0 20 40 60 80 100 120 140 160 RG, Gate Resistance () T J, Junction Temperature (C) Fig. 9 - Typical Switching Losses vs. Gate Resistance Fig. 10 - Typical Switching Losses vs. Junction Temperature www.irf.com 5 IRG4BC20MDPBF 10.0 RG = 50 TJ = 150C VGE = 15V 100 VGE = 20V T J = 125 Total Switching Losses (mJ) 8.0 VCC = 480V 6.0 C, Capacitance(pF) SAFE OPERATING AREA 10 4.0 2.0 0.0 5 10 15 20 25 1 1 10 100 1000 I C , Collector Current (A) VDS, Drain-to-Source Voltage (V) Fig. 11 - Typical Switching Losses vs. Collector-to-Emitter Current 100 Fig. 12 - Turn-Off SOA Instantaneous Forward Current - I F (A) 10 TJ = 150C TJ = 125C TJ = 25C 1 0.1 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 Forward Voltage Drop - V FM (V) Fig. 13 - Maximum Forward Voltage Drop vs. Instantaneous Forward Current 6 www.irf.com IRG4BC20MDPBF 100 100 VR = 200V TJ = 125C TJ = 25C 80 VR = 200V TJ = 125C TJ = 25C IF = 16A t rr - (ns) 60 I F = 8.0A I IRRM - (A) 10 I F = 16A IF = 8.0A I F = 4.0A 40 I F = 4.0A 20 0 100 di f /dt - (A/s) 1000 1 100 di f /dt - (A/s) 1000 Fig. 14 - Typical Reverse Recovery vs. dif/dt 500 Fig. 15 - Typical Recovery Current vs. dif/dt 10000 VR = 200V TJ = 125C TJ = 25C 400 VR = 200V TJ = 125C TJ = 25C 300 di(rec)M/dt - (A/s) Q RR - (nC) I F = 16A 200 1000 IF = 4.0A IF = 8.0A I F = 16A I F = 8.0A 100 IF = 4.0A 0 100 100 100 di f /dt - (A/s) 1000 di f /dt - (A/s) 1000 Fig. 16 - Typical Stored Charge vs. dif/dt Fig. 17 - Typical di(rec)M/dt vs. dif/dt www.irf.com 7 IRG4BC20MDPBF 90% Vge +Vge Same type device as D.U.T. Vce Ic 10% Vce 90% Ic Ic 5% Ic 80% of Vce 430F D.U.T. td(off) tf Eoff = t1+5S Vce ic dt t1 Fig. 18a - Test Circuit for Measurement of ILM, Eon, Eoff(diode), trr, Qrr, Irr, td(on), tr, td(off), tf t1 t2 Fig. 18b - Test Waveforms for Circuit of Fig. 18a, Defining Eoff, td(off), tf GATE VOLTAGE D.U.T. 10% +Vg +Vg Ic trr Qrr = trr id dt tx tx 10% Vcc Vce Vcc 10% Ic 90% Ic DUT VOLTAGE AND CURRENT Ipk 10% Irr Vcc Vpk Irr Ic DIODE RECOVERY WAVEFORMS td(on) tr 5% Vce t2 Eon = Vce ie dt t1 t2 DIODE REVERSE RECOVERY ENERGY t3 t4 Erec = Vd id dt t3 t1 t4 Fig. 18c - Test Waveforms for Circuit of Fig. 18a, Defining Eon, td(on), tr Fig. 18d - Test Waveforms for Circuit of Fig. 18a, Defining Erec, trr, Qrr, Irr 8 www.irf.com IRG4BC20MDPBF Vg GATE SIGNAL DEVICE UNDER TEST CURRENT D.U.T. VOLTAGE IN D.U.T. CURRENT IN D1 t0 t1 t2 Figure 18e. Macro Waveforms for Figure 18a's Test Circuit L 1000V 50V 6000F 100V Vc* D.U.T. RL= 0 - 480V 480V 4 X IC @25C Figure 19. Clamped Inductive Load Test Circuit Figure 20. Pulsed Collector Current Test Circuit www.irf.com 9 IRG4BC20MDPBF Notes: Repetitive rating: VGE=20V; pulse width limited by maximum junction temperature (figure 20) VCC=80%(VCES), VGE=20V, L=10H, RG = 50 (figure 19) Pulse width 80s; duty factor 0.1%. Pulse width 5.0s, single shot. TO-220AB Package Outline 2.87 (.113) 2.62 (.103) 10.54 (.415) 10.29 (.405) 3.78 (.149) 3.54 (.139) -A6.47 (.255) 6.10 (.240) -B4.69 (.185) 4.20 (.165) 1.32 (.052) 1.22 (.048) 4 15.24 (.600) 14.84 (.584) 1.15 (.045) MIN 1 2 3 H E X F E T- GATE 1 1234- LEAD ASSIGNMENTS L E A D A S S IG N M E N T S IG B T s , C o P A C K 1234G ATE CO LLE CTO R E M IT T E R CO LLE CTO R 14.09 (.555) 13.47 (.530) G A T2 - DRAIN E D R A3 N SOURCE IS O U R- C E 4 DRAIN D R A IN 4.06 (.160) 3.55 (.140) 3X 3X 1.40 (.055) 1.15 (.045) 0.93 (.037) 0.69 (.027) M B A M 3X 0.55 (.022) 0.46 (.018) 0.36 (.014) 2.54 (.100) 2X NOTES: 1 DIMENSIONING & TOLERANCING PER ANSI Y14.5M, 1982. 2 CONTROLLING DIMENSION : INCH 2.92 (.115) 2.64 (.104) 3 OUTLINE CONFORMS TO JEDEC OUTLINE TO-220AB. 4 HEATSINK & LEAD MEASUREMENTS DO NOT INCLUDE BURRS. TO-220AB Part Marking Information E X AM P L E : T H I S I S A N IR F 1 0 1 0 L O T COD E 1789 AS S E M B L E D O N W W 1 9, 1 99 7 IN T H E A S S E M B L Y L IN E "C " IN T E R N A T IO N A L R E C T IF IE R L OGO AS S E M B L Y LOT CODE P AR T N U M B E R N o t e : " P " in a s s e m b l y li n e p o s i t io n in d i c a t e s " L e a d - F r e e " D AT E CO D E YE AR 7 = 1997 W EE K 19 L IN E C Data and specifications subject to change without notice. This product has been designed and qualified for the Industrial market. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information. 12/03 10 www.irf.com Note: For the most current drawings please refer to the IR website at: http://www.irf.com/package/ |
Price & Availability of IRG4BC20MDPBF |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |